topblog Ivoire blogs

11/02/2018

Autel MaxiSYS Elite No Communication Message

25

If the MaxiSys Display Tablet is not connected to the VCI device, an “Error” message displays. An “Error” message indicates the display tablet is not communicating with the Autel MaxiSYS Elite, and so cannot gain access to the vehicle control module. In this case, you need to do the following check-ups:

1.Check if the VCI device is powered on.
2.In case of wireless connection, check if the network is configured correctly, or if the right device has been paired.
3.If during the diagnosis process, the communication is suddenly interrupted due to the loss of signal, check if there is any object that causes signal interruption.
4.Check if the VCI device is properly positioned. It is recommended to put the VCI device with the front side up.
5.Try standing closer to the VCI device to obtain more stable signals, and faster communication speed.

6.In case of wired connection, check the cable connection between the display tablet and the VCI device.
7.Check if the green LED on the VCI device is illuminated for BT, Ethernet, or USB.
8.Check if the Error LED on the Autel Maxisys device is on, this may indicate there is a communication error between the devices, in this case try re-establishing the connection again; if this does not work, there may be a hardware problem with the device, in this case contact for technical support.

B If the VCI device is unable to establish a communication link, a prompt message displays with check instructions. The following conditions are the possible causes for this massage to display:

1.The Diagnostic Scanner VCI device is unable to establish a communication link with the vehicle.
2.You’ve selected a system for testing that the vehicle is not equipped Incorrect vehicle identification was entered.
3.There is a loose connection
4.There is a blown vehicle fuse.?
5.There is a wiring fault on the vehicle, or the data cable or adapter.
6.There is a circuit fault in the data cable or adapter.
7.Incorrect vehicle identification was entered

16/01/2018

Autel Maxisys Elite with Docking Station and Bluetooth OBDII Connector

Autel’s most complete diagnostic tool for cars sold in the USA is the MaxiSys Elite. This model replaced the Autel MS908P about a year ago.   Amazon, eBay and other websites are selling the same model for about $50 more that Best Value Company.   Although we collect sales tax on sales made to California customers, CnAutotool will collect sales tax to all customers in states where sales tax is applicable.

19-1

The Autel Elite features a charging cradle (sometimes called a charger or docking station).   The Autel OBD2 is wireless via Bluetooth.   The tablet uses a standard Android operating system so you are able to watch YouTube videos or browse the web.

The unit is not listed on our site, but we stock it and sell it.

It includes a 2-year subscription and warranty, high resolution screen, docking station, J2534 box, and is supported by Autel US. Since 2009, AESwave has been an authorized reseller for Autel North America.

Plus, we let you choose which VCI to include:
– the Mini VCI
– the large VCI with 4-ft cable

Also, at no extra charge, AESwave includes the two cables required to flash BMW F-chassis:
– the BMW Ethernet cable
– and an Ethernet to USB Adapter cable

Click here for more information about our Original Autel MaxiSYS Elite