topblog Ivoire blogs


How to repair BMW 328xi E90 window regulator by Autel MS908P

The story is that: a 2006 BMW 328xi E90 rear right window was not working, replaced window regulator but it was stuck not all the way up and down. Used Autel MS908P to repair window regulator OK! So share this success case here.


How Autel MS908P initialize BMW window regulator, reset BMW auto window?

Plug the J2534 ECU Programming Device into car OBD port. Then you can use it to connect Autel Tool  MaxiSys Pro MS908P with car via Wi-Fi.

8-4 8-3

Click “Diagnostics” and choose “BMW”.

8-4 8-5

Or you can directly click the VIN button at left upper corner, choose “Auto detect” and it will read VIN automatically and show vehicle information.

8-6 8-7

Now you need to connect car with power charger over 12V. Then put remote key into key slot and press car Start button.


Then go to “Hot Function”.


Choose “Window, door and roof” then “Initialize window regulators” function.

8-10 8-11

Follow the tips “Switch on terminal 15 (ignition)”, keep remote key in key slot and do not press the brake pedal, press car Start button to turn ignition to terminal 15.

Choose to initialize the “Passenger’s side, rear” window regulator.


The rear right window will automatically open and close.

After that you can roll up and down that window normally.

Autel MaxiSys MS908P successfully initialize BMW 328xi E90 On rear right window regulator! BMW auto window reset OK!


Which Tata Mahindra Maruti diagnostic scanner, Vpecker EasyDiag, Autel 908P or X431 V

All of Vpecker EasyDiag Indian version, Autel Maxisys Pro MS908PLaunch X431 V can fully work with Indian cars Tata, Mahindra and Maruti, read details as below.

1.TATA Function List, all of the above tools can work on.

Note: “X” means fully supported


2.Maruti Function List, seems only Vpecker EasyDiagand Launch X431 Vcan work on.

Note: “X” means fully supported

7-2 7-4 7-5 7-6 7-7 7-8 7-9

3.Mahindra Function List: seems Vpecker EasyDiag andAutel MaxiSys Pro 908Phas a wide range of Mahindra, Launch X431 V is limited to work on Mahindra.

Note: “X” means fully supported

7-10 7-11 7-12


Vpecker EasyDiag India adapter:

-> fully works on all Indian cars (TATA, Maruti and Mahindra)

-> Wins in Price, $199 free shipping on

-> no area limit, that means users can order in any country.

-> built-in wifi  allows Vpecker to communicate with the vehicles via WIFI.

Launch X431 V:

-> Woks on all TATA and Maruti cars, limited to work on Mahindra.

-> Wins in famous brand Launch Company

-> Has a wide range of vehicle coverage about 100 brands at reasonable price

Autel MaxiSys Pro 908P

-> Woks on all TATA and Mahindra cars, limited to work on Mahindra.

-> Better for those professionals who have a wide range of vehicles to repair and maintenance.


Share Experience for Porsche PIWIS Tester 2 V15.1VCI Configuration Error

Sometimes when your Diagnostic Tool for Porsche connect USB and Power indicators turned on, the Porsche PIWIS VCI displayed an error message: “VCI configuration error. There is no VCI was recognized.”

30-1 30-2

We have few customer feedback that the Porsche PIWIS Tester 2 V15.1 VCI may meet configuration error when the piwis tester ii have well communicated has been built with laptop. technician check the problem and share experience for Porsche PIWIS Tester 2 V15.1VCI configuration error.

Possible reason:
Incorrect operation.Auto Scanner Tool Porsche tester II users do not need to enter into VCI self-test procedure.

Please follow the correct operation procedure provided below:
1) Turn ignition to ON and start the engine
2)Connect Porsche Tester II system to the car, wait until the indicator light flashes then connect the device with computer using USB cable.
3)Select your Porsche model and year


4)Enter PIWIS diagnostics interface.

5) If the system displays “Control unit selection: Loading control unit selection”, the PIWIS software is working.


NOTE: you won’t see control unit list if piwis tester is not connected properly or the device is damaged.

6) If the system cannot detect vehicle ECU modules, there is no good communication among the vehicle,device and computer or the PIWIS tester 2 tool is damaged.