topblog Ivoire blogs

21/11/2017

firmware upgrade guide of Chinese BMW ICOM A / A2


if you happen to purchased China Clone ICOM A or ICOM A2 interface in chinese industry, the best way to update chinese BMW ICOM A / A2 firmware to most recent version, and function on most current ISTA/D ISTA/P software program, Right here, vipprogrammer share upgrade guide of china clone BMW ICOM A / A2 firmware, and 10 Steps upgrade Operation for Chinese BMW ICOM A / A2 firmware.


Exactly where to download most current Auto key Programmer BMW ICOM A / A2 firmware file, and tips on how to do the update in your BMW ICOM in chinese marketplace. Is there any known FAQ within the net accessible or is this effortless user guide?

1). Use your cable and connect BMW ICOM to port
2). Energy ICOM by 12V power adapter or from 1x DLC
3). Use your browser (IE) and browse 169.254.92.38:60080/
User name: root
Password: NZY11502
4). Click "Update Firmware",and you can obtain the version of firmware.
5). Choose ICOM-BootImage-XX-XX-XX.bin, set image variety to "SYSTEM",
click "Send the file"
6). When it will say "Write the image file towards the flash?", click "Yes",
then the ICOM led it'll been RED
7). When it will say "The Method IMAGE update was successfull",
click "Update Firmware"
8). Select ICOM-ApplicationImage-XX-XX-XX.bin, set image type to "APPLICATION",
click "Send the file",the file is massive so it will take some minutes to finish have patience.
9). When it can say "Write the image file towards the flash?", click "Yes",
then the ICOM led it can been RED once more
10). When it's ok, click "reboot".


How to update ICOM A or A2 firmware, pdf document free download:
www.autonumen.com

Les commentaires sont fermés.